|
|
|
Coleman Axle Tube 5 x 5 GN Chromoly Tubing
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., chromoly tubing. Specify overall length tip to tip when ordering.
Price: $120.13
Retail: $123.85
You Save: $3.72
|
|
|
|
|
Coleman Axle Tube, 5 X 5 Coleman/Howe Chromoly
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., chromoly tubing. Specify overall length tip to tip when ordering.
Price: $120.13
Retail: $123.85
You Save: $3.72
|
|
|
|
|
Coleman Axle Tube, 5 x 5 Coleman/Howe D.O.M,
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., D.O.M. tubing. Specify overall length tip to tip when ordering.
Price: $101.51
Retail: $104.65
You Save: $3.14
|
|
|
|
|
Coleman Axle Tube, 5 x 5 GN
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., D.O.M. tubing. Specify overall length tip to tip when ordering.
Price: $101.51
Retail: $104.65
You Save: $3.14
|
|
|
|
|
Coleman Axle Tube, IMCA
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., chromoly tubing. Specify overall length tip to tip when ordering.
Price: $120.13
Retail: $120.13
You Save: $0.00
|
|
|
|
|
Coleman Axle Tube, Wide-5
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., chromoly tubing. Specify overall length tip to tip when ordering.
Price: $120.23
Retail: $123.95
You Save: $3.72
|
|
|
|
|
Coleman Axle, 28 Spline, Solid
This axle is available in .5 inch increments up to 41 inch long. They fit 28 spline rears with 24 spline drive flanges.
Price: $148.41
Retail: $153.00
You Save: $4.59
|
|
|
|
|
Coleman Axle, 31 Spline, Gun Drilled, GN
This axle is available in .5 inch increments up to 36.5 inch long. They fit 31 spline rears with 24 spline drive flanges. They are ground for axle seals and gun drilled for a 30% weight savings.
Price: $201.61
Retail: $207.85
You Save: $6.24
|
|
|
|
|
Coleman Axle, 31 Spline, Gundrilled
This axle is available in .5 inch increments up to 41 inch long. They fit 31 spline rears with 24 spline drive flanges. 30% weight savings over solid axles.
Price: $181.58
Retail: $187.20
You Save: $5.62
|
|
|
|
|
Coleman Axle, 31 Spline, Solid
This axle is available in .5 inch increments up to 41 inch long. They fit 31 spline rears with 24 spline drive flanges.
Price: $148.41
Retail: $153.00
You Save: $4.59
|
|
|
|
|
|
|
|
Coleman Driveshaft, Aluminum , 1350 Series
This heavy-duty aluminum driveshaft has all the advantages of our lightweight aluminum driveshaft with the exception of heavy-duty 1350 series billet aluminum weld yokes and heavy-duty 1350 series (1 3/16" x 3/8"0 u-joints. Each driveshaft is balanced and includes 1350 series u-joints. This driveshaft offers an 8-lb weight savings over standard steel shafts and are rebuildable. Warning: This driveshaft is not for street use or drag racing.
Price: $302.20
Retail: $311.55
You Save: $9.35
|
|
|
|
|
Coleman Driveshaft, Aluminum, 1310 Series
This lightweight aluminum driveshaft is made from 3.00" O.D. x .125 wall aluminum tubing, custom made to Coleman's specifications, the end yokes are CNC machined from billet aluminum. Each shaft is balanced and includes 1310 series u-joints. This driveshaft offers an 8-lb weight savings over standard steel driveshaft and are rebuildable. Warning: This driveshaft is not for street use or drag racing.
Price: $249.19
Retail: $256.90
You Save: $7.71
|
|
|
|
|
Coleman Driveshaft, Lightweight Steel
This driveshaft is made from 2.5" O.D. x .090 wall D.O.M. steel tubing. It is intended for use in IMCA modifieds, sportsman, and other limited horsepower cars. It comes with u-joints and is balanced. Warning: This driveshaft is not for street use or drag racing.
Price: $182.40
Retail: $188.05
You Save: $5.65
|
|
|
|
|
Coleman, Axle Tube, Wide-5
These axle tubes are available in any length or can be shipped extra long and you cut to length. The tubes are made from 3" O.D. x 2 5/8" I.D., D.O.M. tubing. Specify overall length tip to tip when ordering.
Price: $101.51
Retail: $104.65
You Save: $3.14
|
|
|
|
|
Coleman, Axle, 31 Spline, Solid, GN
This axle is available in .5 inch increments up to 41 inch long. They fit 31 spline rears with 24 spline drive flanges. Ground for axle seal.
Price: $144.96
Retail: $149.45
You Save: $4.49
|
|
|
|
|
Panard Bar Mount, Clamp - On
This panard bar mount fits all 3" diameter tubes and features a four bolt clamp. Mount must be tack welded after installation.
Price: $50.39
Retail: $51.95
You Save: $1.56
|
|
|
|
|
Pro-Lite Driveshaft and Slider Yokes, Lightweight
This driveshaft and yoke is intended for use on limited horsepower race cars. It features a precision ground tube with wield yokes that have been machined hollow for a 1.5" pound average weight savings. The slider yokes have been machined to eliminate extra material and are .5" pound lighter than a standard yoke.
Price: $193.95
Retail: $199.95
You Save: $6.00
|
|
|
|
|
Trailing Arm/Shock Mount, Clamp-On
This clamp-on steel, trailing arm and shock mount fits 3" diameter axle tubes. Its four bolt clamp insures a solid mount and the slotted trailing arm bracket offers precise adjustment. Can be used with coil-over shocks. Mount must be tack welded in place after installation.
Price: $85.26
Retail: $87.90
You Save: $2.64
|
|
|
|
|
Trailing Arm/Shock Mount, Clamp-On, 2 Hole
This clamp-on, steel trailing arm and shock mount fits all 3" diameter axle tubes. It has a 2 hole trailing arm mount and a coil-over shock mount. The four bolt clamp mount offers secure mounting. This mount must be tack welded in place after installation
Price: $70.76
Retail: $72.95
You Save: $2.19
|
|
|
|
|
Trailing Arm/Shock Mount, Clamp-On, 3 Hole
This clamp-on, steel trailing arm and shock mount fits all 3" diameter axle tubes. It has a 3 hole trailing arm mount and a coil-over shock mount. The four bolt clamp mount offers secure mounting. This mount must be tack welded in place after installation
Price: $72.99
Retail: $75.25
You Save: $2.26
|
|
|
|
|
Trailing Arm/Shock Mount, IMCA Modified Clamp-On
This clamp-on steel trailing arm and shock mounts fits all 3" diameter axle tubes. It has four clamping bolts for a secure mount. It features an inverted mount for standard shocks and a mount for coil-over eliminators with 5" diameter springs. The mount must be tack welded in place after installation.
Price: $91.22
Retail: $94.05
You Save: $2.83
|
|
|
|
|
Trailing Arm/Shock Mount, Sportsman, Clamp-On
This clamp-on, steel, trailing arm and shock mount fits all 3" diameter axle tubes. It has a 2 hole trailing arm mount along with a coil-over shock mount and a conventional shock mount. The four bolt clamp mount offers secure mounting. This mount must be tack welded in place after installation.
Price: $87.05
Retail: $89.75
You Save: $2.70
|
|
|
|
|
Trailing Arm/Shock Mount, Weld-On
This weld-on, steel trailing arm/shock mount is designed to be welded to 3" diameter axle tubes. It features a 2-hole trailing arm mount and a coil-over shock mount. Note when welding to axle tube it is important to check tube for straightness.
Price: $58.83
Retail: $60.65
You Save: $1.82
|
|
|
Sign In
